DIY Freezer Room Complete Kit
2.4m x 1.5m x 2.4m DIY Freezer Room Kit – Flat-Pack Walk-In Cold Storage
Fast & Easy to Install | Flat-Pack Design | Prices Include GST
Need a reliable DIY freezer room kit you can install yourself? OzSupply Australia's flat-pack walk-in freezer rooms are built for cafes, restaurants, commercial kitchens, butchers and anywhere sub-zero commercial refrigeration is required — at a fraction of the cost of a custom-built freezer room.
Each DIY freezer kit is designed for anyone with basic DIY skills to assemble. You only need a few basic tools — we supply the Allen Key — plus every fixture and fitting: sealant, screws, caps, aluminium U channel, angle and coving.
What's Included in Your DIY Freezer Room Kit
- Energy-efficient 100mm polyurethane insulated wall and roof panels, pre-cut to size
- Tecumseh Hermetique condensing unit ranging from 1 hp (1620 W) to 2½ hp (3579 W) depending on Freezer Size (See Table Below)
- — refrigeration capacity rated at -25°C SST
- Lockable 750mm x 2000H hinged door with full accessory set and emergency release
- Door heater
- Pressure relief valve
- Electronic controller
- Dual pressure control
- Weatherproof LED light
- Weatherproof switch
- Full set of tube work
- Internal cool room drain
- Sight glass
- Strainer drier
- TX valve
- Allen key for easy installation
- Cool room sealants
- Cool room extrusion
Optional Custom Fit-Out
- Flat-packed 4-tier stainless steel shelving (extra charge)
Key Features & Benefits
- Designed for operating temperatures of -18°C to 40°C ambient, with nominal refrigeration capacity rated at -25°C
- High-density polyurethane (PUR) panels: lightweight, strong, moisture-resistant, anti-corrosive and one of the best insulators in the building industry, with an R-value of R-5 to R-7 per inch
- Tecumseh HTA condensing unit with L'Unite Hermetique compressor for robust, energy-efficient freezer performance in extreme Australian heat
- Copper tails on all Rotalock valves and fully wired single-phase fan motors for quick installation
- FH, TFH and TAG models include auto-reset HP/LP control, crank case heater and oil sight glass
- On-site assembly available at an extra cost
- Flat-packed and wrapped for easy, cost-effective transport
- 12-month warranty
- Prices include GST
Why Choose a DIY Freezer Room Kit from OzSupply?
We stock our own range of DIY freezer room and cool room kits, so when you call our team we can match you with the right kit and confirm everything you need is included — first time.
Need a fully custom-made or professionally installed refrigeration solution instead? Our sister business Coolrooms Plus (03) 9794 9273, based in Dandenong South VIC 3175, can help — visit CoolRoomsPlus.com.au.
DIY Kit Accessories & Equipment
Complete your build with:
- Cool Room Shelves
- PVC Curtains
- LED Lights
- Refrigeration Door Latches & Handles
- Refrigeration Door Hinges
Plus many more cool room, cold room and freezer room fittings and supplies — call OzSupply Australia today.
Freezer Kit Options
| Room Size (L × W × H) | Unit Type | SKU | Price | Unit Capacity | Brand | Operating Temperature |
|---|---|---|---|---|---|---|
| 2.4 × 2.0 × 2.4 m | Remote | KITF242024 | $8,620 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 1.5 × 2.4 m | Remote | KITF241524 | $8,099 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 1.8 × 2.4 m | Remote | KITF241824 | $8,205 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.0 × 2.0 × 2.4 m | Remote | KITF202024 | $8,205 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 2.4 × 2.4 m | Remote | KITF242424 | $10,899 | 2 hp (2109 W) | Tecumseh Hermetique | −25°C SST |
| 3.0 × 2.0 × 2.4 m | Remote | KITF302024 | $10,899 | 2 hp (2109 W) | Tecumseh Hermetique | −25°C SST |
| 3.0 × 2.4 × 2.4 m | Remote | KITF302424 | $11,395 | 2 hp (2109 W) | Tecumseh Hermetique | −25°C SST |
| 4.0 × 2.4 × 2.4 m | Remote | KITF402424 | $14,299 | 2½ hp (3579 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 1.5 × 2.4 m | Slide-In | KITF241524SI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 2.0 × 2.4 m | Slide-In | KITF242024SI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.0 × 2.0 × 2.4 m | Slide-In | KITF202024SI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 1.8 × 2.4 m | Slide-In | KITF241824SI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.0 × 1.5 × 2.4 m | Drop-In | KITF201524DI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 2.0 × 2.4 m | Drop-In | KITF242024DI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.0 × 2.0 × 2.4 m | Drop-In | KITF202024DI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
| 2.4 × 1.8 × 2.4 m | Drop-In | KITF241824DI | $9,515 | 1½ hp (1620 W) | Tecumseh Hermetique | −25°C SST |
Brand: Tecumseh Hermetique
Operating condition: −25°C SST
Refrigeration Unit Comparison
| Feature | Remote Unit | Slide-In Unit | Drop-In Unit |
|---|---|---|---|
| Configuration | Separate indoor evaporator and outdoor condensing unit | Single packaged unit installed through a wall panel | Single packaged unit installed through the ceiling or roof panel |
| Position | Evaporator inside the room and condensing unit outside | Fan section inside the room and motor section outside | Fan section below the ceiling and motor section above the room |
| Installation | Requires refrigeration pipework, electrical work and onsite commissioning | Slides through a prepared wall opening with reduced onsite pipework | Drops into a prepared ceiling opening with reduced onsite pipework |
| Space Required | Requires suitable outdoor space for the condensing unit | Requires suitable clearance outside the wall | Requires suitable clearance and structural support above the ceiling |
| Best Suited To | Larger rooms, flexible layouts and installations where noise and heat should be located away from the room | Smaller rooms and straightforward installations with suitable wall access | Smaller rooms where wall space is limited and adequate overhead clearance is available |
| Main Advantage | Flexible equipment placement and suitable for a wider range of room sizes | Compact, convenient and comparatively straightforward to install | Preserves wall space and provides a compact installation |
| Important Consideration | More onsite refrigeration work is required | The wall opening and external clearance must suit the unit | The ceiling structure and overhead clearance must suit the unit |
Important: Refrigeration and electrical installation must be completed by appropriately qualified tradespeople. Contact Coolrooms Plus if you need help selecting the correct unit for your installation.
